PP meltblown filter cartridge
Short Description:
PP meltblown filters are made of 100% PP superfine fiber by means of thermal spraying and tangling without chemical adhesive. Fibers are freely adhered as machines rotate, to form dimensional micro-porous structure. Their progressively dense structure features small pressure difference, strong dirt holding capacity, high filter efficiency, and long service life. PP meltblown filters can effectively eliminate suspended solids, particulates, and rusts off fluids.
PP Meltblown Filter Cartridge
PP meltblown filters are made of 100% PP superfine fiber by means of thermal spraying and tangling without chemical adhesive. Fibers are freely adhered as machines rotate, to form dimensional micro-porous structure. Their progressively dense structure features small pressure difference, strong dirt holding capacity, high filter efficiency, and long service life. PP meltblown filters can effectively eliminate suspended solids, particulates, and rusts off fluids.
Key Features
◇ The deep trench structure on the surface of filters is able to divert water direction and reduce water flow resistance;
◇ Progressively dense structure, increasing dirt holding capacity and service life; no fiber shedding problem;
◇ 100% pure PP superfine fiber; ensuring strong anticorrosion and high filter precision;
Ordering Information
RPP--□--H--○--☆--△--◎--♡
|
□ |
○ |
☆ |
|
△ |
||||||
|
No. |
Removal rating (μm) |
No. |
Length |
No. |
End cpas |
No. |
O-rings material |
|||
|
010 |
1.0 |
0 |
9.75” |
D |
Double open end |
S |
Silicone rubber |
|||
|
030 |
3.0 |
1 |
10” |
M |
222/flat |
E |
EPDM |
|||
|
050 |
5.0 |
2 |
20” |
P |
222/fin |
B |
NBR |
|||
|
100 |
10 |
3 |
30” |
Q |
226/fin |
V |
Fluorine rubber |
|||
|
250 |
25 |
4 |
40” |
O |
226/flat |
♡ |
||||
|
750 |
75 |
5 |
50” |
◎ |
No. |
Outer diameter |
||||
|
100H |
100 |
6 |
60” |
No. |
Filter surface |
A |
2.5"(63mm) |
|||
|
150H |
150 |
|
|
B |
PP meltblown |
B |
2.55”(65mm) |
|||
|
|
|
|
|
G |
Meltblown cutting |
C |
4.5”(115mm) |
|||
