Glass Firber membrane filter cartridge
Short Description:
This series filter cartridges are made of superfine glass fiber, showing extremely high dirt holding capacity, applicable to the pre-filtering of gases and liquids. Due to the ultralow protein absorption capability, they are also widely used in bio-pharmacy.
Glass Fibre Pleated Cartridge
This series filter cartridges are made of superfine glass fiber, showing extremely high dirt holding capacity, applicable to the pre-filtering of gases and liquids. Due to the ultralow protein absorption capability, they are also widely used in bio-pharmacy.
Key Features
High porosity, small differential pressure, strong dirt holding capacity, long service life;
With universal chemical compatibility and can filter acid-proof, alkali resistance, corrosion resistance liquids and organic solvents;
Deeply pleated structure with large filter area, quick flow rate and low protein absorption capability, improving the flow rate and filter efficiency;
Material Construction
◇ Filter medium: Superfine glass fiber (GF)
◇ Support/drainage: PP
◇ Core and cage: PP
◇ O-rings: see the cartridge list
◇ Seal method: melting
Typical Applications
◇ Removing oils, particles, and impurities out of compressed air;
◇ Air pre-filtering and precise filtration in the fermentation field;
◇ Removing cell debris and suspended solids in the bio-pharmacy field;
Operating Conditions
◇ Maximum working temperature: 80°C
◇ Sterilization temperature: 121°C; 30 minutes
◇ Maximum positive pressure difference: 0.42 MPa, 25°C
◇ Maximum negative pressure difference: 0.28 MPa, 60°C
Key Specifications
◇ Removal rating: 0.45, 0.7, 1.2, 3.0, 5.0, 10 (unit: μm)
◇ Effective filter area: 0.4~2.0 m2 /10"
◇ Outer diameter: 69 mm, 83 mm, 130 mm
Ordering Information
SCC--□--H--○--☆--△
|
□ |
○ |
☆ |
|
△ |
||||||
|
No. |
Removal rating (μm) |
No. |
Length |
No. |
End caps |
No. |
O-rings material |
|||
|
004 |
0.45 |
5 |
5” |
A |
215/flat |
S |
Silicone rubber |
|||
|
006 |
0.7 |
1 |
10” |
B |
Both ends flat/both ends passing |
E |
EPDM |
|||
|
010 |
1.2 |
2 |
20” |
F |
Both ends flat/one end sealed |
B |
NBR |
|||
|
030 |
3.0 |
3 |
30” |
H |
Inner O-ring/flat |
V |
Fluorine rubber |
|||
|
050 |
5.0 |
4 |
40” |
J |
222 stainless steel liner/flat |
F |
Wrapped fluorine rubber |
|||
|
100 |
10 |
|
|
K |
222 stainless steel liner/fin |
|
|
|||
|
|
|
|
|
M |
222/flat |
|
|
|||
|
|
|
|
|
P |
222/fin |
|
|
|||
|
|
|
|
|
Q |
226/fin |
|
|
|||
|
|
|
|
|
O |
226/flat |
|
|
|||
|
|
|
|
|
R |
226 stainless steel liner/fin |
|
|
|||
|
|
|
|
|
W |
226 stainless steel liner/flat |
|
||||