Repeated cleaning and recycling titanium sintered tubular filter element
Short Description:
The titanium tubular filter element is made of high purity titanium powder ,which is ground, sieved , molded and sintered at high temperature and high vacuum. At high temperature, the powder is partially melted and bonded to form a porous structure. the filter element has the advantages of high porosity,excellent mechanicalproperities ,good temperature resistance,excellent chemical compatibility,no shedding, extremely low dissolved substances,repaeted cleaning and recycling , and low operationg cost
Key Features
◇ Strong chemical anticorrosion, wide application range, heat resistance, anti-oxidation, can
cleaning repeatable, long service life;
◇ Applicable to liquid, steam, and gas filtering; strong pressure resistance;
Typical Applications
◇ Removing carbon during the process of thinning or thickening liquids to be infused, injections,
eye drops, and APIs;
◇ Filtering high-temperature steams, superfine crystals, catalysts, catalytic gases;
◇ Precise filtrating water treatment systems after ozone sterilization and aerated filtering;
◇ Clarifying and filtering beers, beverages, mineral water, spirits, soy, vegetable oils, and
vinegars;
Key Specifications
◇ Removal rating: 0.45, 1.0, 3.0, 5.0, 10, 20 (unit: μm)
◇ Porosity: 28%~50%
◇ Pressure resistance: 0.5~1.5MPa
◇ Heat resistance: ≤ 300°C (wet state)
◇ Maximum working pressure difference: 0.6 MPa
◇ Filter End caps: M20 screw thread, 226 plug
◇ Filter length: 10″, 20″, 30″
Ordering Information
TB–□–H–○–☆–△
|
□ |
○ |
☆ |
|
△ |
||||||
|
No. |
Removal rating (μm) |
No. |
Length |
No. |
End caps |
No. |
O-rings material |
|||
|
004 |
0.45 |
1 |
10” |
M |
M20 screw thread |
S |
Silicone rubber |
|||
|
010 |
1.0 |
2 |
20” |
R |
226 plug |
E |
EPDM |
|||
|
030 |
3.0 |
3 |
30” |
|
|
B |
NBR |
|||
|
050 |
5.0 |
|
|
|
|
V |
Fluorine rubber |
|||
|
100 |
10 |
|
|
|
|
F |
Wrapped fluorine rubber |
|||
|
200 |
20 |
|
|
|
|
|
||||
