OEM Factory for Meltblown Filter Supplier - Medical grade 0.22um hydrophobic ptfe membrane air filters – kinda
Short Description:
OEM Factory for Meltblown Filter Supplier - Medical grade 0.22um hydrophobic ptfe membrane air filters – kinda Detail:
NWF series cartridges filter media is a hydrophobic PTFE membrane, applicable to the pre-filtering and sterilization of gas and solvent. PTFE membrane has the strong hydrophobicity, its water erosion resistance capacity is 3.75 times stronger than the ordinary PVDF, so applicable to gas pre-filtering and precise filtering and solvent sterilization, they are widely applied in pharmacy, food, chemical industry, and electronics. NWF cartridges show excellent heat resistance, they can be repeatedly used in online steam sterilization or high-pressure disinfection. It also have high interception efficiency, high guarantee, and long service life.
Key Features
◇ Highly safe sterilization, ensuring 100% filter efficiency in humid environment during gas
filter, 0.2um filter rating in liquid, for gas filter, single layer: < Φ0.01μm; double layer: < 0.003μmΦ;
◇ Strong hydrophobicity, passing water intrusion test, avoiding residues due to the integrity of solvent wetting test;
◇ Single- or double-layer; large filter area, small pressure difference, large throughput, long service life;
◇ Excellent chemical compatibility, endurable to acid, alkali, and organic solvent;
◇ Cartridge independently numbered, production batch traceable;
◇ Passing 100% integrity test, quality safe and reliable;
Operating Conditions
◇ Maximum working temperature: 90°C, 0.20 Mpa
◇ Sterilization temperature: 121°C; 30 minutes
◇ Maximum positive pressure difference: 0.42 MPa, 25°C
◇ Maximum negative pressure difference: 0.21 MPa, 25°C
Key Specifications
◇ Removal rating: 0.05, 0.1, 0.2, 0.45, 0.8, 1.0, 3.0, 5.0 (unit: μm)
◇ Effective filter area: single-layered ≥ 0.6 /10″; double-layered: ≥ 0.5 /10″
◇ Outer diameter: 69 mm, 83 mm, 130 mm
Quality Assurance
◇ Passing USP biological reactivity test to class VI plastics
◇ Filtrate: <10 mg per 10 inch cartridge (Φ69)
◇ Endotoxin: < 0.25 EU/ml
◇ Endurable to repeated steam sterilization (more than 50 times) in no-load state
Ordering Information
NWF–□–◎–◇–○–☆–△
|
□ |
◎ |
☆ |
|
△ |
||||||
|
No. |
Removal rating (μm) |
No. |
Support layer |
No. |
End caps |
No. |
O-rings material |
|||
|
005 |
0.05 |
H |
Single layer |
A |
215/flat |
S |
Silicone rubber |
|||
|
010 |
0.1 |
S |
Double layer |
B |
Both ends flat/both ends passing |
E |
EPDM |
|||
|
002 |
0.2 |
○ |
F |
Both ends flat/one end sealed |
B |
NBR |
||||
|
004 |
0.45 |
No. |
Length |
H |
Inner O-ring/flat |
V |
Fluorine rubber |
|||
|
008 |
0.8 |
5 |
5” |
J |
222 stainless steel liner/flat |
F |
Wrapped fluorine rubber |
|||
|
010 |
1.0 |
1 |
10” |
K |
222 stainless steel liner/fin |
|
|
|||
|
030 |
3.0 |
2 |
20” |
M |
222/flat |
◇ |
||||
|
050 |
5.0 |
3 |
30” |
P |
222/fin |
No. |
Class |
|||
|
|
|
4 |
40” |
Q |
226/fin |
P |
Pharmacy |
|||
|
|
|
|
|
O |
226/flat |
E |
Electronics |
|||
|
|
|
|
|
R |
226 stainless steel liner/fin |
G |
Food and pharmacy |
|||
|
|
|
|
|
W |
226 stainless steel liner/flat |
|
|
|||
Product detail pictures:
Related Product Guide:
Bear "Customer first, Excellent first" in mind, we operate closely with our customers and supply them with efficient and expert services for OEM Factory for Meltblown Filter Supplier - Medical grade 0.22um hydrophobic ptfe membrane air filters – kinda, The product will supply to all over the world, such as: Bolivia, Romania, Senegal, Now, we professionally supplies customers with our main merchandise And our business is not only the "buy" and "sell", but also focus on more. We target to be your loyal supplier and long-term cooperator in China. Now, We hope to be the friends with you.
By Stephanie from European - 2017.04.18 16:45
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Christian from Barcelona - 2018.09.16 11:31
