Leading Manufacturer for Filter Capsule Manufacturer - 0.45um 5″ pp membrane capsule filter for small volume filtration – kinda

Key Features
◇ Pleated structure improve filters dirt holding capacity and high throughput, and prolongs the

filters service life;
◇ The disposable structure does not require a stainless steel housing, making the filters more

economical, low cost and convenient than the conventional filter methods;
◇ Minimize product and filtrate residues, it’s a best choice for laboratories and small-sized

mechanical terminal filter;
◇ Screw-based connection, making the filter easy replacement and convenient, multiple types of

connectors are available for selection;

Typical Applications
◇ Online filtering of inkjet inks, inks, solvents, and corrosive solutions;
◇ Pre-filtering and precise filtrating of large-volume tissue culture solutions and laboratory

small-volume agents;
◇ The material liquid and solvent filtration of dyes and photoresist in optical storage industry;
◇ Pre-filtering and precise filtrating of air, nitrogen, and carbon dioxides;

Material Construction

◇ Filter medium: PP, PES, PTFE, N66, Stainless steel
◇ Support/drainage: PP

◇ Core and cage: PP

◇ O-rings: see the cartridge list

◇ Seal method: melting

Operating Conditions
◇ Maximum pressure: 60 psi (4.1 bar), 25°C
◇ Sterilization temperature: 121°, 15 min (disinfection cabinet or pressure cooker)
◇ Maximum operation pressure range: 0.01~0.25 MPa, 0~50°C
◇ Maximum pressure difference: 0.28 MPa, 0~25°C

Key Specifications
◇ Removal rating: 0.01, 0.02, 0.1, 0.2, 0.45, 1.0, 1.5, 3.0, 5.0, 10 (unit: μm)
◇ Effective filter area: 158~2000 cm²
◇ Filter length: 45~192cm

Ordering Information
EMP–□–○–☆–△–♡