High Quality for Felt Filter Bag Supplier - Medical grade 0.22um hydrophobic ptfe membrane air filters – kinda
Short Description:
High Quality for Felt Filter Bag Supplier - Medical grade 0.22um hydrophobic ptfe membrane air filters – kinda Detail:
NWF series cartridges filter media is a hydrophobic PTFE membrane, applicable to the pre-filtering and sterilization of gas and solvent. PTFE membrane has the strong hydrophobicity, its water erosion resistance capacity is 3.75 times stronger than the ordinary PVDF, so applicable to gas pre-filtering and precise filtering and solvent sterilization, they are widely applied in pharmacy, food, chemical industry, and electronics. NWF cartridges show excellent heat resistance, they can be repeatedly used in online steam sterilization or high-pressure disinfection. It also have high interception efficiency, high guarantee, and long service life.
Key Features
◇ Highly safe sterilization, ensuring 100% filter efficiency in humid environment during gas
filter, 0.2um filter rating in liquid, for gas filter, single layer: < Φ0.01μm; double layer: < 0.003μmΦ;
◇ Strong hydrophobicity, passing water intrusion test, avoiding residues due to the integrity of solvent wetting test;
◇ Single- or double-layer; large filter area, small pressure difference, large throughput, long service life;
◇ Excellent chemical compatibility, endurable to acid, alkali, and organic solvent;
◇ Cartridge independently numbered, production batch traceable;
◇ Passing 100% integrity test, quality safe and reliable;
Operating Conditions
◇ Maximum working temperature: 90°C, 0.20 Mpa
◇ Sterilization temperature: 121°C; 30 minutes
◇ Maximum positive pressure difference: 0.42 MPa, 25°C
◇ Maximum negative pressure difference: 0.21 MPa, 25°C
Key Specifications
◇ Removal rating: 0.05, 0.1, 0.2, 0.45, 0.8, 1.0, 3.0, 5.0 (unit: μm)
◇ Effective filter area: single-layered ≥ 0.6 /10″; double-layered: ≥ 0.5 /10″
◇ Outer diameter: 69 mm, 83 mm, 130 mm
Quality Assurance
◇ Passing USP biological reactivity test to class VI plastics
◇ Filtrate: <10 mg per 10 inch cartridge (Φ69)
◇ Endotoxin: < 0.25 EU/ml
◇ Endurable to repeated steam sterilization (more than 50 times) in no-load state
Ordering Information
NWF–□–◎–◇–○–☆–△
|
□ |
◎ |
☆ |
|
△ |
||||||
|
No. |
Removal rating (μm) |
No. |
Support layer |
No. |
End caps |
No. |
O-rings material |
|||
|
005 |
0.05 |
H |
Single layer |
A |
215/flat |
S |
Silicone rubber |
|||
|
010 |
0.1 |
S |
Double layer |
B |
Both ends flat/both ends passing |
E |
EPDM |
|||
|
002 |
0.2 |
○ |
F |
Both ends flat/one end sealed |
B |
NBR |
||||
|
004 |
0.45 |
No. |
Length |
H |
Inner O-ring/flat |
V |
Fluorine rubber |
|||
|
008 |
0.8 |
5 |
5” |
J |
222 stainless steel liner/flat |
F |
Wrapped fluorine rubber |
|||
|
010 |
1.0 |
1 |
10” |
K |
222 stainless steel liner/fin |
|
|
|||
|
030 |
3.0 |
2 |
20” |
M |
222/flat |
◇ |
||||
|
050 |
5.0 |
3 |
30” |
P |
222/fin |
No. |
Class |
|||
|
|
|
4 |
40” |
Q |
226/fin |
P |
Pharmacy |
|||
|
|
|
|
|
O |
226/flat |
E |
Electronics |
|||
|
|
|
|
|
R |
226 stainless steel liner/fin |
G |
Food and pharmacy |
|||
|
|
|
|
|
W |
226 stainless steel liner/flat |
|
|
|||
Product detail pictures:
Related Product Guide:
We're committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for High Quality for Felt Filter Bag Supplier - Medical grade 0.22um hydrophobic ptfe membrane air filters – kinda, The product will supply to all over the world, such as: Ecuador, Pretoria, Angola, Our factory covers an area of 12,000 square meters, and has a staff of 200 people, among which there are 5 technical executives. We are specialized in producing.We have rich experience in export. Welcome to contact us and your enquiry will be replied as soon as possible.
By Leona from kazakhstan - 2018.06.03 10:17
The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
By Elsa from Puerto Rico - 2017.06.22 12:49
